If your home has a septic system, pumping the septic tank is a routine maintenance expense that many home owners plan for. But how much value are you getting out of your septic pumping service? Do they just show up, pump out your tank and leave? Maybe you have never imagined to inquire about.
When you work with a septic company to perform routine septic pumping services, needless to say you anticipate those to pump the solids out of your tank and drive them away. However, when the tank is empty, this can be the right time to check for potential problems using the tank making recommendations to fix the problem before it causes the whole system to fail. It is important to carry out a three-point check each and every time your septic tank is pumped: Check the tank baffle(s), gray water to solids ratio, and soil intrusion into your tank.
Tank Baffles – The baffles in your septic tank are designed to prevent solids from flowing into your disbursement system, otherwise known as your “leaching field.” Tank baffles tend to be the very first part to go in the tank. If caught soon enough, replacing a baffle is easy and costs significantly less than replacing a failed leaching field.
Gray Water To Solids Ratio – How many times you pump your tank is sometimes estimated by the quantity of bedrooms or specifically the amount of people living in your house and the dimensions of your septic tank. Technically, the frequency of pumping is determined by the solids to water ratio. A septic tank should not exceed 25% solid waste. This can cause solids to get in the septic leaching field. By observing this, your septic company must be able to fine-tune your pumping schedule to get more life away from your leaching field.
Ground Water Intrusion – Another problem with septic tanks is groundwater intrusion, which shows being a heavy rust discoloration at the top of the tank. This can be a sign that somewhere the concrete has worn or cracked. Excessive water entering your tank can overload your leaching system. Additionally, it can point to a structural problem in your tank or sewage line that can be addressed before it might be bigger.
Apart from these three checkpoints that are standard with most septic pumping services, should your septic system includes a filter or even an effluent pump (if your leaching field is greater than your tank you possess an effluent pump) those should be cleaned as well. Black water is another flag to look for when pumping your tank. Black water means aerobic bacteria has died kqpmuy the septic tank is not really working properly. Quite often this points to your ventilation problem.
On the average, a four bedroom home with a 1500 gallon tank is usually pumped every 2 to three years. Proper septic system care and maintenance can extend the life span of your own septic system five, ten, or even fifteen years longer than a septic system that is neglected. If you’re not sure how often your tank needs to be pumped, give your neighborhood septic company a phone call. A professional company ought to be ready to send a person to go to your home and check with you.