Precisely what is the different between a pin lock and a ball keg? Let us have a quick look! All used cornelius kegs invested the first part of their life as a vessel for soda. Ball lock kegs had been produced by Pepsi and pin lock kegs had been produced by Coca Cola. This is typical practice until soft drinks focus in hand bags changed the lonely cornelius kegs. Therefore, with various used kegs at their removal, homebrewers were quick to discover this abundant resource and make use of it as essential.

Ball Keg

The 2 significant distinctions among these two kinds of kegs is size and connection type. Ball lock kegs certainly are a little slimmer, but a bit taller where pin locks certainly are a small smaller, but just a little broader. Ball lock keg contacts use a diamond ring of ball bearings to safe contacts to keg posts while pin lock contacts use a “tongue and groove” type set up to secure contacts.

An additional difference is how every type of keg can be depressurized. Ball lock kegs include a quick launch device within the main lid in the keg while pin lock kegs has to be depressurized by pushing down the middle of the gasoline link keg post.

Both kinds of kegs have threaded quick contacts readily available to ensure that homebrewers can change effortlessly between pin lock and ball lock design kegs (even commercial kegs!). No matter which way you want to keg, you will still have the ability to match 5 gallons of dark beer inside a keg and it is a great deal simpler than bottling!

The storage containers we call Ball Lock and Pin Lock Kegs come from the soft drinks business. Also referred to as Cornelius Kegs, Corny Kegs and Corney Kegs, these were originally designed to shop and disperse soft drinks pre-blend. The large soda companies decided on various style containers for pre-mix. Pepsi landed around the Ball Lock style while Coke uses the Pin Lock style.

Initially, It’s vital that you comprehend both do the same with somewhat various and dimensions featuring. Note: All measurements on this page should be thought about approximate. You will find different types and producers of kegs. Their dimensions are typically about the same, however, many kegs and manufacturers differ somewhat. There are several dimensions of kegs available such as 2.5, 3, 5, 10 and 15 gallons. This article targets the frequently used 5 gallon size

Generally speaking… Each Ball Lock and Pin Lock design lids are similar measurement and they are exchangeable. You can make use of a Ball Lock Lid on the Pin Lock Keg and the other way round. A huge difference are definitely the PRV (pressure comfort device) features in between the two designs. Both have automatic safety PRV valves. Which is, when the pressure becomes too high, both will instantly vent for safety reasons. The main difference is in handbook PRV performance. Ball Lock Keg lids have a pull ring that allows you to personally vent the keg as you would like. You may wish to accomplish that just for removing the keg cover or vent extra pressure so as to get down to some lower stress. Having a handbook PRV valve is surely an advantage within my book and on this count Ball Lock Style kegs win. Again, these are generally general claims, check with the keg’s producer or supplier for specific keg cover dimensions and PRV performance. Note: There is certainly an additional less frequent dimensions of lid/keg called racetrack design. These usually are not interchangeable with standard lids.

Keg Tap Diagram

Because standard Ball Lock and Pin Lock Covers are exchangeable. A great upgrade for Pin Lock kegs is always to change Pin Lock design lids with Ball Lock Design Lids. Ball Lock style lids are, in my view, exceptional since the manual PRV enables you to easily vent your keg when necessary.

Ball Lock: The two main main post dimensions for standard ball lock kegs. 11/16″ and 7/8″. These can can be found in both 6 point and 12 point, suitable variations. For your larger 7/8″ articles I’ve seen each 6 point and 12 napete designs. A 12 point plug will work on the 6 point post, although not vice versa. For the smaller 11/16″ articles I have only observed 6 point. Not to say that 12 point don’t exist, I just don’t recall seeing any. I actually have seen a couple of other sizes – 5/8″ and 9/16″, but I would personally think about these much more rare, and low-regular.

This is important from a device perspective. I would recommend a 12 point plug or wrench for larger 7/8″ posts. Smaller 11/16″ post ought to work with either 6 or 12 point tools. Pin Lock: I’m mindful of one regular size 13/16″. As previously mentioned this requires a unique notched plug.

New Ball Lock Kegs – Look At This Post..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.