Creating harmony in the middle of heavy foot or vehicle traffic is fairly tough, particularly if you own a commercial building. This is often an issue in departmental stores, restaurants, or other crowded places, which explains why certain regulations are necessary for a more organised operation. But apart from these rules, it is also essential that you give people some visual signs of what these rules are, in the form of stainless bollards so people will be made aware there are rules to be followed.
Bollards in public areas – Bollards are normally found in public areas, and you could find parking bollards in streets with heavy traffic or facing buildings that require defense against vehicles. Some are even used rather than cycle racks. Others would even allow these bikes to be locked for security purposes.
When bollards are installed, it is mainly to reinforce safety. These are visual indicators that no unauthorised person is allowed to enter a location, that is often signified with the help of a chain connecting the bollards. Which means that people are prohibited to enter the location that is cordoned with bollards.
All steel bollards are galvanised to BS EN ISO 1461 and also have the choice of powder coating to any BS or RAL colour. Mild steel tube can be found in varying thicknesses 60mm as much as 114mm diameter have a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube can be found in larger wall thicknesses to provide the greatest safety barriers.
Of really low maintenance, steel requires only occasional cleaning with tepid water and soap or even a mild detergent. In heavy industrial areas or parts of a higher level of traffic bollards may be subjected to more deposits, in order to retain the desired finish a much more frequent maintenance programme is recommended.
Areas requiring vehicle access in the daytime and need a secure and safe area at nighttime can utilise a telescopic bollard. The bollards have a light lifting weight, approximately 15kgs, and retract to ground level permitting continued vehicle access. When the bollard is lifted and locked in place it provides high security to the area, this design can be manufactured in a thicker steel wall to supply anti ram resistance.
There are numerous materials utilized to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be found with additional features, like being sound sensitive or automated. Fixed bollards have light reflectors to allow people know where these are located, particularly the drivers. With no reflectors, they could easily cause accidents to take place within the streets.
The installation of bollards, whether they are utilised as a substitute to get a bike stand or otherwise, is dependent upon what sort of bollards you may have chosen. Fixed bollards have to be installed into concrete or with new foundations. Factors miecfq because the soil condition and design have to be carefully examined initially.
On the contrary, removable or manufactured bollards often include their mounting systems. Even if they have to be mounted on their own, no drilling is important to set up these sorts of bollards. They don’t have to be glued to the ground either with epoxy or similar materials.
Retractable bollards can also be found. At first, they could seem like layered telescopes that can be used with manual or automatic features, based on your choice. Manual bollards have to be lifted through the help of lift-assistance mechanisms while automated bollards use hydraulics and electricity.